PSR - Soft Starters
Technical data
• Operating voltage: 208...600 V AC
• Wide control supply voltage: 100...240 V
• AC, 50/60 Hz or 24 V AC/DC
• Rated operating current: 3...105 A Two-phase controlled
• Soft start with voltage ramp
• Soft stop with voltage ramp
• Built-in bypass providing energy saving and ease of installation
• Ease of adjustment with three potentiometers
• Communication with FieldBusPlug and FieldBusPlug adapter
• Run and end-of-ramp relays available for status monitoring
• Connection kits between softstarter - ABB motor protection switches
Communication protocols:
• Modbus RTU
• PROFIBUS
• DeviceNet
Certificates:
• CE, cULus, CCC, EAC,
ANCE, C-tick, PRS
Reduce electrical stress and protect motor with motor protection switch
The PSR lowers the starting current of the motor. The motor is protected against overload and short circuit thanks to the connection with the motor protection switch.
Save time and money with built-in bypass and faceplate adjustment potentiometers
With the built-in bypass feature of the PSR, you can save installation time and also save space in your panel. Adjustments can be made quickly and easily with three potentiometers on the front.
Reduce mechanical stress on the engine
With the soft start and soft stop made using PSR, mechanical wear and damage on the engine can be reduced. This contributes positively to the engine operating life.
PSTX - Soft Starters
Technical data
• Operating voltage: 208 – 690 VAC
• Wide rated control supply voltage: 100 – 250 V, 50/60 Hz
• PSTX nominal operating current: from 30 to 1250A (triangle: 2160A) 3-phase controlled
• Direct and delta connection
• Varnished electronic cards against humidity, dust and corrosive effects
• Detachable keypad IP66 (Type 1, 4X,12)
• Easily adjustable graphic display with 17 different language options
• Built-in bypass that speeds up installation and saves energy
• Built-in Modbus RTU for control and monitoring
• Compatibility with all basic communication protocols
• Current, voltage, power factor etc. analog output for measurement
Communication protocols:
• Standard internal: Modbus RTU
• Anybus/FBP:
- MODBUS RTU
- PROFIBUS
- DeviceNet
- EtherNet/IP
- PROFINET
Certificates:
• CE, cULus, CCC, EAC, ANCE,
C-tick, ABS, DNV GL, Lloyd's Register,
CCS, PRS, Class NK
Full engine protection
PSTX provides complete motor protection in a single unit against load and mains disturbances. PT-100 protects your motors in the safest way with many protection functions such as earth fault protection and over/under voltage.
Time and energy saving with internal bypass
When the motor reaches rated speed, PSTX activates its bypass. This reduces the heat dissipation of the softstarter and saves energy. With PSTX's built-in bypass feature, it is possible to reduce installation time and save space in your panels.
Full control of pumps
It's time to use pump processes to their full potential. PSTX has special application features such as torque control, which is the most efficient method of starting and stopping pumps. The pump cleaning feature reverses the pump rotation direction, cleans the pipes and increases operational safety.
PSE - Soft Starters
Technical data
• Operating voltage: 208...600 V AC
• Wide rated control supply voltage: 100...250 V AC, 50/60 Hz
• Rated operating current: 18...370 A Two-phase controlled
• Voltage ramp and torque control at start and stop
• Current limiting
• Kick start
• Energy and space saving internal bypass
• Varnished circuit board suitable for use in corrosive and dusty environments
• Illuminated graphic display where settings can be made easily with symbols only.
• Optional external keypad IP66 (Type 1, 4X,12)
• Communication with FieldbusPlug adapter and FieldBusPlug
• Analogue output for motor current monitoring
• Electronic thermal protection
• Underload protection
• Locked rotor protection
Communication protocols:
• Modbus RTU
• PROFIBUS
• DeviceNet
• Modbus/TCP
Certificates:
• CE, cULus, CCC, EAC, ANCE,
C-tick, ABS, DNV GL, Lloyd's
Register, CCS, PRS, Class NK
Basic motor protection and current limiting
It has many protection functions for PSE pumps that can be used in different load situations. For example, overload and underload protection. The current limiting feature allows you to start and control the motor more efficiently under weak mains conditions.
Internal bypass and compact product design that saves time and money
In the PSE series, there is a bypass that saves time and space during installation. There is no language option on the keypad and the screen, and the icons are displayed graphically. The compact product design speeds up installation and makes it extremely easy.
Torque control feature that prevents water damage in pump systems
It is the most efficient method to start and stop a torque-controlled pump. PSE has a special torque ramp that has been developed in collaboration with pump manufacturers, which optimally prevents water damage.